3.5mm Dia Cortical Screw – Self Tapping (HexDrive)
-
Screw Shank Dia: 3.5mm
-
Material: Stainless Steel and Titanium Alloy
Following Corresponding Instruments to be Use with above Locking Screw:
| Cat. No. | Product Description |
|---|---|
| 260.250 | Drill Bit – S.S. Quick Coupling End Dia. 2.5mm x 115mm Long |
| 264.025 | Bone Tap – Quick Coupling End Dia. 3.5mm, Thread Length 50mm, Total Length 110mm |
| 301.025 | Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 3.5mm Cortical & 4.0mm Cancellous Screws) |
| 301.060 | Screw Driver Shaft, Q.C. End 2.5mm Tip |
| 301.040 | Small Hexagonal Screw Driver 2.5mm Tip – Silicon Handle |
| 307.060 | Drill & Tap Sleeve Combined 2.5/3.5mm |
| 306.010 | Quick Coupling Handle T-type |
| 303.010 | Small Depth Gauge |
| 305.050 | Counter Sink, Q.C. End 6.0mm Head (for 2.7, 3.5 & 4.0mm Screws) |
| 304.010 | Small Neutral & Loaded Drill Guide |
Description
| Cat No. (Stainless Steel) | Length | Cat No. (Titanium) |
|---|---|---|
| 102.210 | 10 MM | Ti.102.210 |
| 102.212 | 12 MM | Ti.102.212 |
| 102.214 | 14 MM | Ti.102.214 |
| 102.216 | 16 MM | Ti.102.216 |
| 102.218 | 18 MM | Ti.102.218 |
| 102.220 | 20 MM | Ti.102.220 |
| 102.222 | 22 MM | Ti.102.222 |
| 102.224 | 24 MM | Ti.102.224 |
| 102.226 | 26 MM | Ti.102.226 |
| 102.228 | 28 MM | Ti.102.228 |
| 102.230 | 30 MM | Ti.102.230 |
| 102.232 | 32 MM | Ti.102.232 |
| 102.234 | 34 MM | Ti.102.234 |
| 102.236 | 36 MM | Ti.102.236 |
| 102.238 | 38 MM | Ti.102.238 |
| 102.240 | 40 MM | Ti.102.240 |
| 102.242 | 42 MM | Ti.102.242 |
| 102.244 | 44 MM | Ti.102.244 |
| 102.246 | 46 MM | Ti.102.246 |
| 102.248 | 48 MM | Ti.102.248 |
| 102.250 | 50 MM | Ti.102.250 |
| 102.255 | 55 MM | Ti.102.255 |
| 102.260 | 60 MM | Ti.102.260 |
| 102.265 | 65 MM | Ti.102.265 |
| 102.270 | 70 MM | Ti.102.270 |
| 102.275 | 75 MM | Ti.102.275 |
| 102.280 | 80 MM | Ti.102.280 |
| 102.285 | 85 MM | Ti.102.285 |
| 102.290 | 90 MM | Ti.102.290 |
| 102.295 | 95 MM | Ti.102.295 |
| 102.300 | 100 MM | Ti.102.300 |
