4.0mm-Locking-Head-Cancellous-Screw-Full-Thread-Self-Tapping-CAT.NO_.-Ti.105.510-to-T.jpg
4.0mm-Locking-Head-Cancellous-Screw-Full-Thread-Self-Tapping-CAT.NO_.-Ti.105.510-to-T.jpg
4.0mm-Locking-Head-Cancellous-Screw-Full-Thread-Self-Tapping-CAT.NO_.-Ti.105.510-to-T.jpg

Variolock 4.0mm Locking Head Cancellous Screw Full Thread – Self Tapping (Hex Drive)

S.NO CORRESPONDING INSTRUMENTS TO BE USE: Cat. No.
1 Drill Bit S.S. Quick Coupling End Dia. 2.8mm X 180mm Long Calibrated 260.281
2 LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm 804.110
3 Hexagonal Screw Driver 2.5mm Tip Silicon Handle 301.040
4 Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) 804.163
5 Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) 804.168
6 Hexagonal Screw Driver With Self Holding Sleeve 2.5mm Tip (for 2.7mm Cortical, 3.5mm & 4.0mm Locking Head screws) 301.026
7 Small Depth Gauge 303.010
Send Enquiry
Return to Sub Category
Return to Main Category
Categories: ,

Description

Cat No. (Stainless Steel) Length Cat No. (Titanium)
105.912 12 MM Ti.105.912
105.914 14 MM Ti.105.914
105.916 16 MM Ti.105.916
105.918 18 MM Ti.105.918
105.920 20 MM Ti.105.920
105.922 22 MM Ti.105.922
105.924 24 MM Ti.105.924
105.926 26 MM Ti.105.926
105.928 28 MM Ti.105.928
105.930 30 MM Ti.105.930
105.932 32 MM Ti.105.932
105.934 34 MM Ti.105.934
105.936 36 MM Ti.105.936
105.938 38 MM Ti.105.938
105.940 40 MM Ti.105.940
105.942 42 MM Ti.105.942
105.944 44 MM Ti.105.944
105.946 46 MM Ti.105.946
105.948 48 MM Ti.105.948
105.950 50 MM Ti.105.950
105.955 55 MM Ti.105.955
105.960 60 MM Ti.105.960
105.965 65 MM Ti.105.965
105.970 70 MM Ti.105.970
105.975 75 MM Ti.105.975
105.980 80 MM Ti.105.980

 

Related products